Cord insert tool
For inserting cord in self closing locking strips, as in vans and trucks. Tool length 220 mm.
Cord length about 5,5 meter.
|
|
Locking strip insert tool
For inserting rubber or plastic locking strips on car windows. With push device for better
spreading the profile. Length 200 mm. Most popular tip 10 mm included. Available tip sizes are:
|
|
Locking strip insert tool
Old model. For inserting rubber locking strips on car windows. Length 160 mm.
Tip 10 mm included. Available tip sizes are: |
|
Profile tool
With blunt point at the end of the shaft.
For assembly of locking strips in awkward windshield corners.
Length 210 mm.
|
|
Suction cup
With the puller grips a vacuum is created to clamp the suction cup. Can be used to disassemble
or mount a small window, or to hold a car window in place while the sealer is drying.
Use for larger windows suction cup puller |
|
Suction cups
With the locking handles on the suction cups a vacuum is created to clamp the suction cups.
Handy to disassemble or mount larger or slightly bent windows, or to hold a car window in place
while the sealer is drying. Can also be used for body work, for example to pull small dents
from door panels or fenders. Capacity 80 kilo. Take care not to leave window sealant on suction cups.
That diminishes the capacity.
|
|
Windshield cutting knife
Professional cold cutting knife with metal puller grip, covered in blue plastic for comfortable use.
With 90 degrees angled teflon coated knife for cutting through window sealants up to 19 mm thickness.
Pulling capacity 1500 Nm. Length 175 mm. Available as spare part: |
|
Windshield cutting set
Professional cutting set with 2 h14 safety puller grips and a roll of about 50 meters
square cutting wire |
|
Cutting wire, braided
Gold colored metal cutting wire, that consists of 3 braided wires.
On roll of about 20 meter, diameter 0,8 mm. The braided wires offer a larger cutting area
and they release the heat that builds up while cutting. For the professional user to cut many car windows.
|
|
Cutting wire, square
Shining, stainless steel cutting wire of superior quality on roll of about 50 meters, square size 0,8 mm.
Pulling capacity up to 60 kg. The 4 very sharp cutting edges enable a clean cut without much effort.
For the professional user to cut many car windows.
|
|
Cutting wire starter
Improved safety model: pass the cutting wire through the top of the handle and
stick the sharp needle through the the rubber window sealant. Then the sealant can be cut
with window cutting set |
Midlock Speciaalgereedschap Pauwelussen B.V.
Middelmoot 16, 1721 CZ Broek op Langedijk, Netherlands
Phone: +31 331933 - Mail: - Internet: www.midlock.nl