  |
ABS brake sensor fitting chaser
Size: M18. Length 35 mm. For Audi, BMW E36 en E46, Seat, Skoda, Volkswagen.
Cleans the brake sensor fitting from particles of the old sensor.
After cleaning the new sensor can be installed and damage due to incorrect fitting will be prohibited.
The new sensor will correctly transmit the data to the ECU unit.
|
 |
Brake guide bolt screw thread repair set
Size: M9 x 1,25. For repairing the brake guide bolt screw thread in the wheel bearing housing
of Audi A3, Opel, Seat, Skoda, Volkswagen Golf, Golf Variant and new Beetle.
When dismantling these steel guide bolts, the original cast iron inner screw thread gets damaged.
Even oxidation, heat while braking and salt in the winter can do the damage.
With the tap the old screw thread will be removed and new thread made.
Then the insert can be installed and the original guide bolt can be refitted.
|
   |
Extracting tools for insertsTop angle 45 degrees for easy extracting of fitted inserts, when necessary. Just file in the insert a bit at both top sides, for more grip when extracting.Available in 2 sizes: Back to top |
 |
Magnetizer
Having installed the insert, break the tang with the lower part of the installation tool.
This can be magnetized, so that the tang will stick to the installation tool:
the tang does not drop in the opening. Can also be used to magnetize or demagnetize tools,
such as screwdrivers, etc. Opening: diameter 9 mm.
|
 |
Screw pitch gage
Capacity: 0,25 - 6 mm. 24-piece set. Top angle 60 degrees.
Sizes: 0,25 - 0,3 - 0,35 - 0,4 - 0,45 - 0,5 - 0,6 - 0,7 - 0,75 - 0,8 - 0,9 - 1 -
1,25 - 1,5 - 1,75 - 2 - 2,5 - 3 - 3,5 - 4 - 4,5 - 5 - 5,5 - 6 mm
|
 |
Screw pitch gage
Capacity: UNC 4 - 64 coarse thread. 22-piece set. Top angle 60 degrees.
Sizes: 4 - 4,5 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 -
16 - 18 - 20 - 22 - 24 - 32 - 40 - 48 - 56 - 64
|
 |
Screw pitch gage
Capacity: UNF 12 - 80 fine thread. 16-piece set. Top angle 60 degrees.
Sizes: 12 - 14 - 16 - 18 - 20 - 24 - 28 -
32 - 36 - 40 - 44 - 48 - 56 - 64 - 72 - 80
|
 |
Screw thread chaser toolsOften it happens that during maintenance or repair jobs, screw thread is found to be rusted or damaged. Smooth running screw thread is very important, for example when working with a torque wrench. When tightening cylinder head bolts with a torque wrench, rusted or damaged screw thread gives the incorrect results. Midlock supplies very handy thread chasers for very dirty or slightly damaged screw thread. These thread chasing tools are manufactured from special alloy tool steel. For cutting new screw thread these thread chaser tools are not fit. See for cutting new screw thread screw thread repair tools.Back to top |
 |
Screw thread chaser dies
5-piece metric set.
Sizes: M6 x 1 - M7 x 1 - M8 x 1,25 - M10 x 1,5 - M12 x 1,75.
Set sizes 115x73x18 (lxwxh).
|
 |
Screw thread chaser dies
8-piece inch UNC set for coarse screw thread.
Sizes: 1/4 x 20 - 5/16 x 18 - 3/8 x 16 - 7/16 x 14 -
1/2 x 13 - 9/16 x 12 - 5/8 x 11 - 3/4 x 10.
UNC 1/4 - 5/16 - 3/8 - 7/16 can be excahnged with BSW (British Standard Whitworth) screw thread.
Set sizes 115x73x18 (lxwxh).
|
 |
Screw thread chaser dies
8-piece inch UNF set for fine screw thread.
Sizes: 1/4 x 28 - 5/16 x 24 - 3/8 x 24 - 7/16 x 20 -
1/2 x 20 - 9/16 x 18 - 5/8 x 18 - 3/4 x 16.
Set sizes 115x73x18 (lxwxh).
|
 |
Screw thread chaser tap
For screw thread M10 x 1. Drive 1/2 hex. Length 47 mm.
|
 |
Screw thread chaser tap
For screw thread M12 x 1,25. Drive 1/2 hex. Length 53 mm.
|
 |
Screw thread chaser tap
For screw thread M14 x 1,25. Drive 3/8 square and 5/8 hex. Length 48 mm.
|
 |
Screw thread chaser tap
For screw thread M14 x 1,25 and M18 x 1,5. Drive 13/16 hex. Length 75 mm.
|
 |
Lambda (oxgen) sensor screw thread chaser tap
For Lambda (oxygen) sensor screw thread M18x 1,5. Drive 15 mm hex. Length 50 mm.
|
  |
Screw thread chaser file
Universal. For all screw pitch sizes: metric and inch external thread
with top angle 60 degrees. Thread sizes: all metric and inch screw thread, even BSW, UNC, UNF, NPTF.
Files each individual thread. Ideal for larger diameters on e.g. drive shafts,
or for exotic screw thread sizes. Length 230 mm.
|
  |
Screw thread chaser file
For metric external thread with top angle 60 degrees.
Thread sizes: 0,8 - 1 - 1,25 - 1,5 - 1,75 - 2 - 2,5 - 3. Length 215 mm.
|
 |
Screw thread chaser file
or inch external thread with top angle 60 degrees.
Thread sizes: 11 - 12 - 13 - 14 - 16 - 18 - 20 - 24. Length 215 mm.
|
 |
Tap-ease for aluminum
Stick with 12 grams pure wax with mineral oil.
For lubricating and cooling of aluminum while drilling a hole or tapping new screw thread.
Tap-ease drains away the heat when new screw thread is being cut in aluminum,
so that this screw thread will remain in good repair.
|
 |
Safety goggles
With ventilation bores. Meets and exceeds ANSI Z87.1, CE, EN1663B, LM77217, SG201 0403
safety specifications. It’s obligatory to wear safety glasses if contact is possible with drill,
dust or metal particles. Available as spare part: |
| Click here | Info about screw thread repairhow to use, advantages and applications, screw thread repair boxes |
| Click here | Screw thread repair setsfor Metric, Inch, BSW, UNC, UNF |
| Click here | Glow plug screw thread repair setsfor M8x1 - M10x1 - M10x1,25 |
| Click here | Spark plug screw thread repair setsfor M10x1,25 - M14x1,25 - M18x1,5 |
Midlock Speciaalgereedschap Pauwelussen B.V.
Middelmoot 16, 1721 CZ Broek op Langedijk, Netherlands
Phone: +31 331933 - Mail: 
- Internet: www.midlock.nl