|
Bolt and screw extractor set 10
Sizes M5 - M6 - M7 - M8 - M9 - M10 - M12 - M14 - M16 and
3/16 - 1/4 - 9/32 - 5/16 - 11/32 - 3/8 - 7/16 - 1/2 - 9/16.
To remove broken bolts, broken at the surface or in an opening. With the included drill guides
it is possible to drill up to 25 mm deep without a problem. All parts are available as spares.
Drills:
35720 diameter 3,2 and 1/8 -
35725 diameter 4,8 and 3/16 -
35730 diameter 6,4 and 1/4 -
35735 diameter 7,9 and 5/16 -
35740 diameter 8,7 and 11/32
Drill guides:
DG-921 diameter 7,1 -
DG-1021 diameter 7,9 -
DG-1121 diameter 8,7 -
DG-1221 diameter 9,5 -
DG-1321 diameter 10,3 -
DG-1421 diameter 11,1 -
DG-1521 diameter 11,9 -
DG-1621 diameter 12,7 -
DG-1721 diameter 13,5 -
DG-1821 diameter 14,3
Extractors:
ES-10 diameter 6 -
ES-20 diameter 8 -
ES-30 diameter 10 -
ES-40 diameter 11 -
ES-50 diameter 13
|
|
Bolt and screw extractor set 7332
Sizes M6 - M7 - M8 - M10 - M12 - M13 - M14 - M16 and 7/16. With 4 flutes for an escape of
the material that comes out when hammering the extractor in. Advantage: the bolt that is to be
removed will not expand in the opening and will come loose more easily.
All screw extractors are available as spares:
6961 for sizes M6 - M7 - M8
6962 for sizes M10
6963 for sizes 7/16
6964 for sizes M12 - M13 - M14
6965 for sizes M16
|
|
Nut splitter 7047
Capacity 0 - 19 mm. Splits nuts that can not be removed. For best effect expose
the nut first to penetrating oil like Midlock number
9000.
Largest width 36 mm. Length 105 mm.
|
|
Channellock Nut busters
410-G With curved jaw,
handle stop and double lock.
With extra strong jaws, to release bolts and nuts.
Safe-T-Stop feature prevents finger pinch.
Length 240 mm. Capacity 0 - 28,5 mm with parallel jaws.
Jaw length 28,5 mm. Joint thickness 11,2 mm. 4 x adjustable.
414-G With curved jaw,
handle stop and double lock.
With extra strong jaws, to release bolts and nuts.
Safe-T-Stop feature prevents finger pinch.
Length 343 mm. Capacity 0 - 51 mm with parallel jaws.
Jaw length 41,5 mm. Joint thickness 12,7 mm. 6 x adjustable.
|
483-G
|
Channellock nut tongue and groove pliers
463-G With V - jaw
for more points of contact on round stock and tubing.
Length 420 mm. Capacity 0 - 108 mm with parallel jaws.
Jaw length 65 mm. Joint thickness 15 mm. 8 x adjustable.
483-G With V - jaw
for more points of contact on round stock and tubing.
Length 515 mm. Capacity 0 - 140 mm with parallel jaws.
Jaw length 81 mm. Joint thickness 15 mm. 12 x adjustable.
|
Click here |
Adjustable wrenches
0-14 and 0-23,5 and 0-30 and 0-34,5 and 0-38 mm
|