ABS brake sensor fitting chaser
Size: M18. Length 35 mm. For Audi, BMW E36 en E46, Seat, Skoda, Volkswagen.
Cleans the brake sensor fitting from particles of the old sensor.
After cleaning the new sensor can be installed and
damage due to incorrect fitting will not occur.
The new sensor will correctly transmit the data to the ECU unit.
|
|
Alu-wheel hub grinder
Plastic grinder with 3 discs diameter 160 mm.
To clean the wheel hub contact surface.
Process time is about 3 - 25 seconds, depending on the thickness.
Corrosion will be removed succesfully, quickly and easy. Patented.
Available as spare: |
|
Alu-wheel hub grinder
Plastic grinder with 1 disc diameter 160 mm.
To clean the wheel hub contact surface.
Process time is about 3 - 25 seconds, depending on the thickness.
Corrosion will be removed succesfully, quickly and easy. Patented.
Available as spare: |
|
Alu-wheel hub grinder
Plastic grinder with 2 disc diameter 200 mm.
To clean the wheel hub contact surface.
Process time is about 3 - 25 seconds, depending on the thickness.
Corrosion will be removed succesfully, quickly and easy. Patented.
Available as spare: |
|
Alu-wheel hub grinder set
With 8-point grinder holder prohibiting the grinders from sliding and
5 grinder discs diameter 40 mm and 5 grinder discs diameter 60 mm.
To clean the wheel hub contact surface along with the stud bolts.
Corrosion will be removed succesfully, quickly and easy. Patented.
|
|
Brake adjusting plier
With straight jaw and narrow nose.
Air brake tool. Easy brake clearance check for automatic or manual slack adjusters. |
|
Brake bleeding set Eezibleed
For one man brake and clutch bleeding. This set includes connections for
BMW, British Leyland, Chrysler, Fiat, Ford, Mercedes, Mini Classic, Opel,
Peugeot, Renault, Simca, Talbot, Volkswagen and many other European cars.
|
|
Brake bleeding vacuum pump set
For brake bleeding, with many adapters like brake fluid reservoir and adapter lid.
Mityvac vacuum tester set with sturdy plastic pump and pressure release
and 360 degrees swivel gage. Can also be used for brake bleeding.
Many accessories: 2 clear view hoses with length 600 mm,
13 connection adapters, 3 hoses with length 40, 75 and 90 mm,
disc shaped adapter, brake fluid reservoir 120 ml and brake fluid adapter lid.
|
|
Brake bleeding vacuum and pressure pump set
For brake bleeding, with many adapters like brake fluid reservoir and adapter lid.
Mityvac pressure and vacuum pump set with metal pump and pressure release
and 360 degrees swivel gage in rubber protection.
Many accessories in storage space with lid: 2 clear view hoses with length 600 mm,
28 connection adapters, 2 O-rings, 2 hoses with length 75 and 100 mm,
disc shaped adapter, brake fluid reservoir 480 ml and brake fluid adapter lid.
In plastic storage case.
|
|
Brake bleeding wrench
Size: 10 mm. Length 200 mm. Universal wrench, for e.g. Ford, Honda,
Mitsubishi, Peugeot, Suzuki, Toyota and Volvo.
|
|
Brake bleeding wrench
Size: 11 mm. Length 200 mm. Universal wrench, for e.g. Ford, Mitsubishi, Renault and Volvo.
|
|
Brake fluid tester
Complies with ROHS and CE.
|
|
Brake fluid tester
Electronic 12V tester for DOT3, DOT 4 and DOT 5.1 brake fluid.
|
|
Brake guide bolt screw thread repair set
Size: M9 x 1,25. For repairing the brake guide bolt screw thread in the wheel bearing housing
of Audi A3, Opel, Seat, Skoda, Volkswagen Golf, Golf Variant and new Beetle.
When dismantling these steel guide bolts,
the original cast iron inner screw thread gets damaged.
Even oxidation, heat while braking and salt in the winter can do the damage.
With the tap the old screw thread will be removed and new thread made.
Then the insert can be installed and the original guide bolt can be refitted.
|
|
Brake spring plier
For cars. Length 250 mm. Capacity 0 - 90 mm.
With knurled protection cap for a good grip without damaging the glued brake lining.
|
|
Brake spring tool
Length 155 mm. For removing and installing of conical retaining springs on the anchor pins
of DBA drum brakes. Fits e.g. Citroen, Ford, Peugeot, Renault, Talbot.
|
|
Brake spring tool
Length 165 mm. Universal hook and pick set, can also be used for brake springs,
as on Opel Omega and Vectra with spring suspension of the brake calipers.
With 4 screw-in hooks and 1 aluminum grip with magnet.
The strong hooks are screwed individually into the grip.
For more information, see hook and pick sets.
|
|
Brake spring tool
Length 180 mm. Fits hair pin retaining springs on Kadett.
|
|
Brake spring washer tool
Capacity diameter 12 - 23 mm. Length 150 mm. For removing and installing
brake shoe retaining washers and easily aligning nail and washer slot.
|
|
Brake spring washer tool
Capacity diameter 17 - 23 mm. Length 175 mm. For removing and installing
brake shoe retaining washers and easily aligning nail and washer slot.
|
|
Disc brake brush
With very slim brushes. Multi purpose brush with rounded front end on angle.
With hanging slot and ergonomical grip.
Universal, Also for cleaning off clogged lining deposits
without damage when changing brake pad linings. 2 rows of slim brushes, width only 8 mm.
Brush length 90 mm. Width of grip 12 mm.
|
|
Disc brake brush, stainless steel
With very slim, stainless steel brushes. Multi purpose brush with rounded front end on angle.
With hanging slot and ergonomical grip.
Universal, Also for cleaning off clogged lining deposits
without damage when changing brake pad linings. 2 rows of slim brushes, width only 8 mm.
Brush length 90 mm. Width of grip 12 mm.
|
|
Disc brake file
To remove the glaze of brake calipers, often caused by no-squeal brake paste.
Handy size: width 14 mm, 5 mm thick, file length 145 mm.
Specially hardened file (do not drop) and sturdy grip.
|
|
Disc brake wrench
For disassembly of brake pads and calipers, disc brake bolts, gearbox oil drain plugs,
valve adjusting, brake adjustment, brake bleeding. Size: Hex 7, angled 90 degrees.
Length 140 x 100 mm. Fits e.g. Audi 80 (ATE), BMW (brake pad replacement on series 3
at rear and series 5), Ford Escort 3, Fiesta 2, Scorpio and Sierra,
brake calipers on Opel Astra G and Volkswagen (ATE).
Also for valve adjusting at water cooled VAG engines, amongst others
Audi and Volkswagen Golf, Passat, Polo, Scirocco.
|
|
Pipe and tube bending plier
Capacity diameter 4,75 - 5 - 6 - 8 - 10 mm and diameter 3/16 - 1/4 - 5/16 - 3/8.
With 2 tubing adapters. Length 250 mm. For petrol, oil and brake lining
made of aluminum, copper or soft steel.
Makes a perfectly round bend, without damage or kinking.
|
|
Pipe and tube bending plier
Capacity diameter 4,75 - 5 - 6 - 8 - 10 mm and diameter 3/16 - 1/4 - 5/16 - 3/8.
Length 210 mm. For petrol, oil and brake lining
made of aluminum, copper or soft steel.
Makes a perfectly round bend, without damage or kinking.
|
|
Pipe and tube cutter
Capacity 3-16 mm. Heigth 38 mm. Length 48 mm. For use on hard to reach places,
like brake lines under the car body.
|
|
Pipe and tube cutter
Capacity 3-28 mm. Length 120 mm. Sturdy model of good quality.
Internally protected screw thread spindle. With tube file.
Available as spare part: |
|
Spring dowel punch for brake pads
Size: 6 mm. Necessary when replacing brake pads that are assembled with 6 mm spring dowels.
|
|
Click here | Brake caliper toolsbrake caliper rewind tool sets and adapters |
Click here | Brake cylinder honeshones, stones, honing oil |
Click here | Brake line flaring toolsflaring tools |
Midlock Speciaalgereedschap Pauwelussen B.V.
Middelmoot 16, 1721 CZ Broek op Langedijk, Netherlands
Phone: +31 331933 - Mail: - Internet: www.midlock.nl