universal
|
Awl
Professional model with impact resistant handle. For making holes in car body panels,
aligning, marking positions and scribing, etc. Length 195 mm.
|
|
Bending plier
Profile depth 13 mm. Jaw width 22 mm. Length 275 mm.
Capacity maximum 1 mm body sheet thickness.
|
|
Bending and punching plier
Punch diameter 6 mm. Profil depth 13 mm. Jaw width 22 mm. Length 285 mm. With swivelling head
for bending or punching at hard to reach places. Bending capacity maximum 1 mm and
punching capacity maximum 1,5 mm body sheet thickness.
|
|
Memory saver
Universal. Prevent the loss of electronic memory when disconnecting the car battery.
Cigarette lighter input. Holds low tension on the cars circuit. No need to adjust clock,
radio and other electronic devices. Operates on 9V battery, not included.
|
|
Punching plier
Punch diameter 5 mm. Length 250 mm. Capacity maximum 1,5 mm body sheet thickness.
|
|
Putty knife and scraper
For removal and applying of caulking, undercoating, filler, etc. Superior quality.
Sturdy 2 mm thick blade. With ergonomical, anti-slip grip and eyelet. Length 205 mm.
|
|
Safety goggles
With ventilation bores.
Meets and exceeds ANSI Z87.1, CE, EN1663B, LM77217, SG201 0403 safety specifications.
It is obligatory to wear safety glasses if contact is possible with drill,
dust or metal particles.
Available as spare part: |
|
Sheet metal pullers (2)
Set with 2 pullers. Made in USA from very high alloy steel. Specially shaped hook,
takes care of pulling on full material, about 10 mm from the drilled hole. Never pry,
that will causes breakage as the pull will be too much. Maximum pull 225 kilo. Length 155 mm.
|
|
Spot weld chisel
Extra thin: blade end only 2 mm. Length 240 mm, width 27 mm. For quick and easy spot weld
removal at hard to reach positions. Only for use on thin sheet metal. No warranty.
|
|
Spot weld chisel with protection cap
Extra thin: blade end only 2 mm. Length 240 mm, width 27 mm. For quick and easy spot weld
removal at hard to reach positions. Only for use on thin sheet metal. No warranty.
|
 |
Spot weld cutter
With exchangeable, double cutting head. For quickly cutting spot welds.
Adjustable cutting depth. Hex shaft 3/8, for use in an electric drill.
Capacity diameter 9,5 mm. Length 77 mm.
Available as spare part: |
|
Spot weld cutter
Excellent quality: HSS High Speed steam cleaned Cobalt steel. With self cutting pilot end.
Can also be used for drilling at an angle. Capacity 8 mm. Cutting length 32 mm.
Total length 80 mm.
|
|
Wedge tool
Universal. Made of composite material, that protects as far as possible from scratching.
For loosening delicate materials and for removal of molding strips,
window strips and wiper rubbers of for example BMW, Mercedes, Volvo.
Dimensions 198 x 25 x 26 mm.
|
|
Wedge tool
Combi wedge made of highly visible plastic material.
For door panels, headliners, dash panels, vehicle trim, etc.
Length 200 mm. Width 30 mm. |
|
Welding goggles
For autogenous welding. Visor can be opened for use as safety goggles, and closed for use
as welding goggles. Soft edges, adjustable elastic head belt.
Available as spare parts: |
|
Welding safety device
For protection of electronics against short circuit when welding in situ at the car.
Audible and optical LED signal. Green light at safe circuit. Heavy duty battery clamps.
Saves time not having to dismantle the battery clamps. Extra service to the customer
because radio, clock, etc. do not need readjustment.
|
| Click here | ChiselsCold chisels for metal |
| Click here | Dent pullersFor door panels, sheet metal |
| Click here | Grip wrenchesWith safety lock |
| Click here | Pin Punchesslightly tapered, will not get stuck |
| Click here | Pry barsWith several grips |
| Click here | ScrapersWith straight and bent scraper end |
| Click here | SnipsAviation snips, cable cutters, power cutters, scissors |
| Click here | Taper punchesFor aligning |
| Click here | Windshield repair toolsCutting tools, locking strip tools, suction cups |
Midlock Speciaalgereedschap Pauwelussen B.V.
Middelmoot 16, 1721 CZ Broek op Langedijk, Netherlands
Phone: +31 331933 - Mail: 
- Internet: www.midlock.nl